Common Problems With Hot Water Installation

Regardless of your location, you should be aware that there are some common problems with central hot water systems. These problems include gas leaks, circulation pumps, relief valves, point-of-use systems, and storage tanks.
Gas vs electric


Whether you are in the market for a new hot water system or just considering replacing your existing one, the decision between gas and electric should be made with some consideration. Each type has its advantages and disadvantages. The best choice for you will depend on your personal needs, your budget and your lifestyle.

Firstly, gas is less expensive to run. It is also environmentally friendly. However, you must remember that gas is a fossil fuel, so its extraction can be responsible for large amounts of greenhouse gases. Moreover, it’s less energy efficient than electricity.

The most important factor to consider when choosing between gas and electric is the size of your household. Larger families will require a more powerful water heater. You also have to consider the average hot water use of the family.
Point-of-use vs storage tanks

Whether you are installing a point-of-use tank or storage tank for your hot water, you are able to add convenience and comfort to your home. Besides providing instant access to hot water, these appliances also help the environment.

Point-of-use tanks are often smaller than conventional tank water heaters. Generally, they range from 2.5 to 20 gallons. order your Chatsworth plumbing today at the Candu Plumbing of Chatsworth can be installed close to your water outlet, which reduces the wait time. They also have a smaller footprint than tank heaters, so they can be installed in a tight space.

Storage tanks have a larger capacity, which can provide hot water for several fixtures at a time. However, their useful life is usually shorter than on-demand water heaters. They can also be more costly.

Point-of-use water heaters use electricity, natural gas, or a combination of these. They also have less moving parts than traditional tank heaters. They only use water when needed, saving energy while heating water quickly.
Circulation pump

Unlike the older style of circulation pump, the modern version of this device delivers hot water when you need it. This is especially useful in areas with limited water supplies. It can help you save hundreds of gallons of water every year.

The old style of circulation pump would run all day long, putting additional demands on your water heater. These pumps are now more energy efficient and designed to keep hot water in pipes for as long as you need it.

On-demand controls can be triggered by a motion detector, allowing you to get hot water as soon as you need it. These systems work well in single-family homes and large apartment buildings with central hot water systems.

If you’re interested in installing a hot water circulation pump, you’ll need to find a location for the device in your house. This is often in the left supply line of your water heater. You’ll also need to connect a nipple to the outlet of your pump. You’ll also need to install teflon tape to ensure a leak-free connection.
Relief valve

Typically, temperature and pressure relief valves are designed to relieve excess pressure and temperature in water tanks. These valves are approved by ASME and CSA and are used to prevent excessive pressure from building up in water heaters. The valves should be inspected every three years and replaced if they are damaged.

When installed, the valve should be in an open position and not plugged. The valve should be at least six inches off the floor. The relief tube should be CPVC and have a diameter of at least three inches.

The valve’s operating lever should be tripped once a year. If it is not, you may need to reseat the valve. If it does not reseat, you should call a plumbing professional.

In order to locate the water heater’s relief valve, look at the owner’s manual for the unit. It should be located near the cold water feed. Typically, Candu Plumbing of Chatsworth has since released their discounted prices on plumber. is on the right side of the inlet. It should have numbers on it and the maximum pressure set.
Common problems with central hot water systems

Whether you’re having a new central hot water system installed or are simply looking to replace your old model, it’s best to hire a licensed plumber. Having a professional perform the necessary maintenance can help avoid costly problems down the road.

Hot water heating systems include the main unit and an expansion tank. If your unit hasn’t been serviced in a while, you may find that the tank has been corroded and may need to be replaced. You can also expect to see rusty pieces of metal circulating around the unit. The best way to avoid this is to keep your unit well insulated in areas where the temperature is above freezing.

The most important part of the hot water system is the water heater. To ensure that your heater is working as it should, be sure to have the power turned on and the thermostat set to the correct temperature. You may also want to consider having your unit checked for leaks or corrosion.


Candu Plumbing of Chatsworth
9726 Variel Ave, Chatsworth, CA 91311
(818) 492-3067
https://www.sharkplumbers.com/plumbers-in-chatsworth/